Note: If the "Reset" setting is selected, all learned values are deactivated in the current
Force Mode window.
Optimize geometry/resolution
The active resolution range is defined by the values of the "Horizontal resolution" and "Verti‐
cal resolution" input fields. This range is displayed in the center of the monitor in black.
The inactive resolution range is the unused range between the active resolution and the
maximum resolution of the monitor, namely, 1280 x 1024. In Force Mode, this range is dis‐
played gray (gray scale monitors) or blue (color monitors).
To adapt the active resolution range to the actual video signal resolution, perform the follow‐
ing steps:
1. Open a test pattern with a clearly defined border (e.g. SMPTE image).
2. Open the "Live mode" menu: Main menu → Servicelevel 2 → Force Mode → Live mode.
SCD 19102 / SMD 19102
Instruction for Use, 05/2013
Start-up
6.4 System settings
65