Eizo SCD 19102 Instructions For Use Manual page 51

Servicelevel 2
Special functions for
VGA and BNC signals
SCD 19102 / SMD 19102
Instruction for Use, 05/2013
Function Adjustment / setting
range
PLL phase gain ad‐
Activated / deactivat‐
justment ed
Default: Deactivated
Start-up
6.3 Description of OSD menu
Description
Note: Menu item "PLL
phase gain" is displayed
when "PLL phase gain ad‐
justment" is activated.
The value for the PLL
phase gain is set through
the XICOR AD converter.
Note: If "PLL phase gain
adjustment" is changed
from activated to deactivat‐
ed, menu item "PLL phase
gain" is hidden and the
phase gain is set to the de‐
fault value.
PLL phase gain
Controls the level of phase
error returned to the digital
PLL Each key figure has
double the weight of the
previous key figure.
• 0000: (minimum gain)
• 0111: [default]
• 1111: (maximum gain)
If the "PLL phase gain" is
set too low or too high, dis‐
torted images will be dis‐
played.
Setting the best PLL
phase gain
The best PLL phase gain
can be obtained with the
"Check-11" pixel on / pixel
off image from the Quan‐
tum Data 802R video test
generator.
51