Saved timings can be overwritten at any time.
6.4.6.5
Motion image improvement
If the setting "For motion pictures" is selected and "Force" is carried out in the menu "Blind
mode" or "Live mode", the menu line "Motion image improvement" is displayed with the set‐
ting "Inactive".
If the motion image improvement is to be activated, the setting for this must be changed
from "Inactive" to "Active" either in the "Servicelevel 2" → "Others" menu or in the "Blind
mode" or "Live mode" of the Force Mode menu.
SCD 19102 / SMD 19102
Instruction for Use, 05/2013
Start-up
6.4 System settings
67