Eizo SCD 19102 Instructions For Use Manual page 68

19" color and grayscale monitor

Hide thumbs Also See for SCD 19102:

Table of Contents

Start-up

6.4 System settings

Motion image improvement with interlaced signals

Note

With the setting "Motion image improvement" for interlaced signals, the sharpness settings

cannot be changed in the "Others" menu.

Using the motion image improvement, it is possible to reduce undesirable comb effects in

the case of motion images of interlaced signals with PAL and NTSC resolutions connected

to the VGA" and "DVI Analog" signal inputs.

Motion image improvement with non-interlaced (progressive) signals

Using motion image improvement, it is possible to reduce undesirable staircase signals in

the case of all non-interlaced signals of up to 60 Hz connected to the "VGA" and "DVI Ana‐

log" signal inputs.

Note

Despite motion image improvement, staircase signals can occur with PIP images of the

signal sources "S-Video" and "Composite Video". The staircase signals can occur if a sig‐

nal source with motion image improvement is active in the main picture.

Smd 19102