Eizo SCD 19102 Instructions For Use Manual page 52

Start-up
6.3 Description of OSD menu
Servicelevel 2
52
Function Adjustment / setting
range
PLL frequency gain
Activated / deactivat‐
adjustment ed
Default: Deactivated
Description
Note: Menu item "PLL fre‐
quency gain" is displayed
when "PLL frequency gain
adjustment" is activated.
The value for the PLL fre‐
quency gain is set through
the XICOR AD converter.
Note: If "PLL frequency
gain adjustment" is
changed from activated to
deactivated, menu item
"PLL frequency gain" is
hidden and the phase fre‐
quency is set to the default
value.
PLL frequency gain
Controls the level of fre‐
quency error returned to
the digital PLL Each key
figure has double the
weight of the previous key
figure.
• 0000: (minimum gain)
• 0111: [default]
• 1111: (maximum gain)
If the "PLL frequency gain"
is set too low or too high,
distorted images will be
displayed.
Setting the best PLL fre‐
quency gain
The best PLL frequency
gain can be obtained with
the "Check-11" pixel on /
pixel off image from the
Quantum Data 802R video
test generator.
SCD 19102 / SMD 19102
Instruction for Use, 05/2013