Connecting; General Connection Information - Eizo SCD 19102 Instructions For Use Manual

19" color and grayscale monitor

Hide thumbs Also See for SCD 19102:

Table of Contents

Connecting

5.1

CAUTION

All information and warnings related to this product must be observed to ensure danger-

free operation.

CAUTION

Changes to device

Device settings may only be adjusted by trained service personnel; otherwise, the warran‐

ty is void.

Do not make any changes to the device without prior approval from the manufacturer.

The monitor is designed for individual connection to a graphics card with a power supply of

110 or 240 V (TN-S system with PE conductor).

CAUTION

Observe shielding measures

Please observe all local EMC guidelines pertaining to shielding. If these requirements are

not met, interference signals could penetrate the monitor.

To guarantee perfect image reproduction, the following instructions should be ob‐

served:

Only shielded cables are permitted for all signal connections.

Screw tight or lock all plug-in connections.

Signal and power cables must not be routed through the same duct.

The monitor must not share a power supply with motors or valves (interference peaks!).

NOTICE

Disconnecting from line power

Always set the power switch to "Off" before disconnecting the device from power. Other‐

wise the device could be destroyed.

Smd 19102