Exit Osd - Eizo SCD 19102 Instruction Manual

Commissioning
7.3 Description of OSD menu
Main menu
Servicelevel 2
See also
Exit OSD (Page 52)
7.3.3

Exit OSD

Exit OSD menu
See also
Servicelevel 2 functions (Page 53)
52
Function
Status
Settings in this menu must only be carried out by servicing personnel!
For further information, see "Servicelevel 2 functions" (Page 53).
Accept changes
Reject changes
Adjustment/range
Information
You exit the OSD and can save or
reject any changes.
Press button 2 if you unintentionally
entered this menu and want to return to
the main menu.
Note:
If the OSD menu is exited by changing
the timing or switching off the monitor,
the changes made are saved.
Instruction Manual, 10/2011, A5E01588521A-004
Description
Current display settings in
the respective picture mode
can be called here.
Operating hours of the
•
display
Temperature in the
•
housing (actual and
maximum temperature
over the complete service
life of the display)
Firmware type and
•
version
OSD version
•
Configuration version
•
Current timing
•
Current source
•
Screen resolution
•
Frequency of the input
•
signal (line frequency and
refresh rate)
SCD 19102 / SMD 19102