Eizo SCD 19102 Instructions For Use Manual page 33

Main menu
Auto functions (only
for analog signal)
SCD 19102 / SMD 19102
Instruction for Use, 05/2013
Function
The auto functions are used to automatically set parameters.
The quality of settings depends on the image content and type of syn‐
chronization.
All settings can of course also be optimized manually using the corre‐
sponding items in the OSD menu.
Note: We recommend that an SMPTE test picture is displayed
Auto brightness/
contrast
6.3 Description of OSD menu
Adjustment / setting
range
SCD 19102:
VGA
DVI Digital
Composite
S-Video
DVI Analog
SMD 19102
VGA
DVI Digital
Composite
S-Video
SoG / H / V
On / Off
Default: On
Start-up
Description
After switching the
monitor off and on
again, the image sour‐
ces are queried in se‐
quence.
Note: Alternatively, the
source can be selected
through a hot key func‐
tion (see the OSD
menu → Others →
OSD setting).
This parameter can be
selected for the auto
function
With "On", the bright‐
ness and contrast are
set when the "Auto
functions" are execut‐
ed.
With "Off", the bright‐
ness and contrast are
not set when the "Auto
functions" are execut‐
ed.
Note: This function is
not available for "Sync
on green signals".
33