Product-Specific Safety Instructions - Eizo SCD 19102 Instructions For Use Manual

Safety instructions

2.2 Product-specific safety instructions

2.2 Product-specific safety instructions
CAUTION
If the SCD / SMD 19102 is installed on a stand:
Adjust the monitor height carefully, otherwise there is a risk of injury
When adjusting the height of the monitor, make sure that you do not trap your fingers or
any other objects.
CAUTION
Ensure monitor stability
The stability of the monitor must be ensured following installation of the stand/holder. The
screw insertion depth into the monitor must be between 7 and 9 mm.
CAUTION
Subsequent installation of a stand
The SCD / SMD 19102 C and SCD / SMD 19102 CP monitors are delivered without a
stand. To ensure that a system comprising a monitor and base meet the requirements of
standard EN 60601, select a stand for subsequent installation that meets this standard.
See also
Installing the monitor
Installing the base and cable (SCD 19102)
12
[} 16]
[} 22]
Instruction for Use, 05/2013
SCD 19102 / SMD 19102