Eizo SCD 19102 Instructions For Use Manual
  1. Manuals
  2. Brands
  3. Eizo Manuals
  4. Monitor
  5. SCD 19102
  6. Instructions for use manual
Eizo SCD 19102 Instructions For Use Manual

Eizo SCD 19102 Instructions For Use Manual

1.3 mp 19" lcd monitor
Hide thumbs Also See for SCD 19102:
Table of Contents

Advertisement

Quick Links

Download this manual
Instructions for Use
1.3 MP 19" LCD Monitor
Important
Please read the safety information and all information delivered
with the product carefully to familiarize yourself with safe and
effective usage.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SCD 19102 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Eizo SCD 19102

Summary of Contents for Eizo SCD 19102

  • Page 1 Instructions for Use 1.3 MP 19" LCD Monitor Important Please read the safety information and all information delivered with the product carefully to familiarize yourself with safe and effective usage.

  • Page 2: Legal Information

    Use of EIZO products WARNING EIZO products may only be used for the applications described in the catalog and in the relevant tech- nical documentation. If products and components from other manufacturers are used, these must be recommended or approved by EIZO. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 3: Table Of Contents

    Overview of signals and connections .............. 18 Connection panel.................... 19 Connecting the signal cable.................. 20 DIP switches (for SMD 19102 only)................ 21 Connecting the power cable ................... 21 Installing the base and cable (SCD 19102) ............ 22 Serial interface...................... 25 6 Start-up.......................... 27 Switching on the monitor .................. 27 Operator controls .................... 27 Description of OSD menu .................. 28...
  • Page 4 12 Spare parts / accessories .................... 82 12.1 Monitor stand ...................... 82 12.2 DVI transmission path and cable ................ 82 13 Appendix .........................  84 13.1 Markings and symbols .................... 84 13.2 Warranty ......................... 85 13.3 Repairs ........................ 85 SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 5 13.6 Contact ........................ 85 13.7 Trademarks...................... 86 13.8 China RoHS (Restriction of Hazardous Substances) .......... 87 13.9 China RoHS (Restriction of Hazardous Substances) .......... 89 13.10 Disposal of materials containing mercury ............... 91 Index .......................... 93 SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 6: Introduction

    The monitors are available in color and gray scale variants: • Color monitor – SCD 19102 C, version without protective front pane, without multifunctional stand – SCD 19102 CP, version with protective front pane, IPx2 at front – SCD 19102 D, version without protective front pane, with multifunctional stand •...

  • Page 7: Safety Instructions

    Note Image quality To maintain constant image quality, EIZO recommends cleaning the monitor on a regular basis and checking image properties in accordance with all applicable local regulations. User In the following, health personnel such as surgeons or medical technicians (MTA)s are re- ferred to as the "user".
  • Page 8 No contact between device and patients The device is not suitable for direct contact with a patient. The device and patient must never be touched simultaneously. Otherwise there is a danger to life and limb. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 9 Only use power cables approved for China. These power cables are identified by the labels "CCC" or "CQC". Observe the country-specific regulations Observe all regulations of the country in which the device is used. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 10 If the device is brought into a room with a higher or rising temperature, condensed water will form in and on the device. Do not switch on the device until the condensed water has evaporated. Other- wise, the device could be damaged. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 11 Note that monitors can fail as a result of aging, and that image properties such as brightness, con- trast,and color value can change. Do not touch the monitor screen Due to mechanical pressure or electrostatic discharges, touching the screen can result in brief distur- bances to the image. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 12: Product-Specific Safety Instructions

    The SCD / SMD 19102 C and SCD / SMD 19102 CP monitors are delivered without a stand. To ensure that a system comprising a monitor and base meet the requirements of standard EN 60601, select a stand for subsequent installation that meets this standard. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 13: Description

    • DVI-D video cable 3.2 Performance features SCD 19102 19" color monitor and SMD 19102 19" gray scale monitor have the following features, which permit a wide area of applications. Compact design The monitor benefits from low weight and a small foot print, as well as improved perfor- mance, when compared to conventional CRT monitors.
  • Page 14 In portrait mode, the keypad is positioned at the top right and the OSD is not rotated (i.e. the OSD inscription "Dynamic help for keypad function" is still positioned above the keys). SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 15: Setup And Installation

    The monitor has an anti-glare surface which is only effective if the screen is clean and grease-free. The SCD 19102 CP and SMD 19102 CP monitors have an optically coated protective glass pane, which is well suited for use in a germ-free environment when cleaning agents are used.

  • Page 16: Installing The Monitor

    Strength Insertion depth 7 mm minimum / 9 mm maximum Torque Max. 3 Nm Fig.: Insertion depth of mounting screws See also Installation site [} 15] Installing the base and cable (SCD 19102) [} 22] SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 17: Connecting

    NOTICE Disconnecting from line power Always set the power switch to "Off" before disconnecting the device from power. Other- wise the device could be destroyed. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 18: Connector Location

    The power switch is not covered and is freely accessible. Fig.: Rear view of SCD / SMD 19102 5.3 Overview of signals and connections Fig.: Overview of signals and connections SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 19: Connection Panel

    5.4 Connection panel A connection panel for the signals and power supply is located on the back of the monitor SCD 19102 Fig.: Connection panel of the SCD 19102 color monitor SMD 19102 Fig.: Connection panel of the SMD 19102 gray scale monitor See also Connecting the signal cable [} 20]...

  • Page 20: Connecting The Signal Cable

    The DVI cable can be connected in two ways: • With DVI digital signal or • With DVI analog signal (SCD 19102 only) BNC sockets (SoG / H / V) • With a wire (R or G or B, with composite synchronization): –...

  • Page 21: Dip Switches (For Smd 19102 Only)

    Open and close the connection panel using an appropriate tool. • Insert the appliance plug of the supplied power cable into the line power socket. • The power cable can be secured using a cable grip. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 22: Installing The Base And Cable (Scd 19102)

    CSA Std. C22.2 No. 21 and UL 498. See also Connection panel [} 19] 5.8 Installing the base and cable (SCD 19102) CAUTION Do not use screws of excessive length Screws which are too long can damage mechanical and electronic components of the de- vice.
  • Page 23 Connecting 5.8 Installing the base and cable (SCD 19102) 5. Slowly lower the monitor. 6. First tighten the top two screws. 7. Then carefully turn the monitor 90° clockwise and tighten the lower screws. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 24 For this reason, the connecting cable must not be routed too tightly in the cable duct. 9. Then install the cable duct cover or press it down. Fully installed stand with cables See also Installing the monitor [} 16] SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 25: Serial Interface

    Please note the "6-pin mini-DIN socket" figure: It shows the lower left corner of the under- side of the monitor (viewed from the back). Fig.: Service socket for measuring instruments Fig.: Possible configuration – serial bus mode SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 26 Connecting 5.9 Serial interface * Photometer is a generic term for the measuring instrument suggested by EIZO GmbH Dis- play Technologies: • Advanced Serial Luminance Meter with adapter from 9-pin Sub-D to 6-pin mini-DIN socket **. ** Service mode! Not permitted in the patient environment.

  • Page 27: Start-Up

    Increase/change value Function is selected Decrease/change value All menus except the "Exit Return to previous menu level (settings are retained) OSD" menu "Exit OSD" menu Return to main menu (settings are retained) SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 28: Description Of Osd Menu

    The OSD menu is used to make settings for operation of the monitor with a source. Parts of the OSD menu can also be used without an input signal. See also Exit OSD [} 40] Menu functions [} 29] Service level 2 functions [} 40] SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 29: Menu Functions

    Adjust brightness of monitor backlight Recommended: max. 80 % Adjustment of overall brightness to ambient lighting. Note: If the function "Backlight Command" is activated in the "Others → LUT" menu, the backlight setting cannot be changed. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 30  Red color temp. -32 ... +32 Select red component of display  Green color -32 ... +32 Select green component of display temp.  Blue color temp. -32 ... +32 Select blue component of display SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 31 DVI Digital Note: Alternatively, the source can Composite be selected through a hot key func- tion (see the OSD menu → Others → S-Video OSD setting). DVI Analog   SMD 19102 DVI Digital Composite S-Video SoG / H / V SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 32 Language German, English Use the "Language" menu to se- lect the language of the OSD Default: English menu German or English can be selected. English is the delivery default set- ting. Others SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 33 Filter No. 1 produces the "sharpest" picture, as it does the least filtering. Filter No. 5 filters the most; the greatest danger exists with this filter that details can no longer be recog- nized. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 34 DVI sig- nals. Manual changes to these val- ues are not recommended, as this can result in an impairment of pic- ture quality (loss of gray scales). SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 35 PIP window (only for analog signal) PIP image verti- Slider control Shift the image in the vertical direc- cal position tion in the PIP window (only for analog signal) SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 36 Inactive front Default: Inactive If "Active" is selected, the PIP win- dow can be opened or closed with the saved settings using key 4 on the front without opening the OSD menu. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 37 Gamma curve selection: curve information on the selected curve Default: SCD 19102: LUT The LUTs that can be selected are displayed in the table in the OSD menu. Monitor adjustment – LUT [} 53] SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 38 Default: • If a monochrome signal arrives, it is green on the color monitor. • (SCD19102) • To obtain correct b/w images, set the "Signal" parameter to • Monochrome "Monochrome". (SMD19102) SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 39 Screen resolution • Frequency of the input signal (line frequency and refresh rate) Servicelevel 2 Settings in this menu may only be carried out by service personnel. Service level 2 functions [} 40] SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 40: Exit Osd

    6.3.4 Service level 2 functions NOTICE "Servicelevel 2" is restricted to service personnel trained by EIZO GmbH Display Tech- nologies. The "Servicelevel 2" menu can be accessed from the OSD main menu. Key combination for opening "Servicelevel 2"...
  • Page 41 Remaining margin of backlight that can be used for regulation Note: The data is only displayed when the panel has warmed up (after approx. 20 min). The dis- played value is for information only. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 42 The 5-digit combination indicates which individual memory ad- dresses have been allocated. Example: 10010 ⇒ Addresses 1 and 4 have been allocated. Reset custom Execute Clears the content of the five memory locations settings SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 43 • All the pixels on the display area are activated (exception: The first column on the left of the panel remains black). Test of columns or line driver SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 44 • Standard group • Info window settings • Serial interface settings • H-Scaler clip Reboot Execute The processor is reset The power supply unit is not switched off. The monitor restarts. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 45 (pro- gressive) of up to 60 Hz con- nected to the "VGA" and "DVI Analog" signal inputs. Note: See Motion image improve- ment [} 65] SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 46 160 cd For SMD 19102: Operation time above 400 cd For SCD 19102: Information Operating hours meter Operation time below 160 cd For SMD 19102: Operation time below 400 cd SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 47 Setting the best PLL phase gain The best PLL phase gain can be obtained with the "Check-11" pixel on / pixel off image from the Quantum Data 802R video test generator. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 48 Setting the best PLL frequency gain The best PLL frequency gain can be obtained with the "Check-11" pixel on / pixel off image from the Quantum Data 802R video test generator. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 49 If the clamp width is set too high a black border appears because the back porch was left and the clamping is reaching the active video signal. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 50: Lock/Unlock Osd Menu

    The OSD menu is locked. Unlock • Press key "4" once and then key "2" three times (if the OSD is not active). The OSD menu is unlocked. Delivery state The OSD is unlocked. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 51: System Settings

    • The digital input (DVI-D) does not require a fine adjustment since the signal display is always optimum. With a fine adjustment, it is possible that gray scales are not dis- played. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 52: Monitor Adjustment - Video Source/Graphics Card

    The white value can be set in the same way. Again, use a test pattern with 100% gray value (white). Only the contrast should be adjusted, to ensure that the black value re- mains unchanged. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 53: Monitor Adjustment - Lut

    You can select between five different LUT values in this menu. The values saved in the monitor are shown in a table in the OSD window. Note Additional information is available in the QA software instruction manual. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 54: Monitor Adjustment - Force Mode

    Field 1 consists of the lines 1 to 262 1/2, and field 2 of the lines 262 1/2 to 525. Only a few lines are displayed at the top and bottom of each field. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 55 6.4 System settings Fig.: Interlaced scanning system Fig.: Non-interlaced scanning system A non-interlaced image is output on the screen in that all horizontal lines are scanned from top to bottom in one scan. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 56 Note Always save data with "Force" The timing data are only entered into memory by the "Force" command, and the image is then displayed with the new parameters. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 57 2. Note: For progressive timings with an image refresh rate greater than 60 Hz, only the items "For static pictures" or "Reset" can be selected in line 6 in the "Blind mode" menu. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 58 All settings in "Live mode" must be carried out with the zoom factor "1 to 1" ("Position/ Zoom" menu). Note Always save data with "Force" The timing data are only entered into memory by the "Force" command, and the image is then displayed with the new parameters. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 59 2. Open the "Live mode" menu: Main menu → Servicelevel 2 → Force Mode → Live mode. 3. Select either "For static pictures" or "For motion pictures" in the "Live mode" menu and confirm using key 2. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 60 "For static pictures" or "Reset" can be selected in the "Live mode" menu. 4. Execute the "Force" command using key 2. Note: If the "Reset" setting is selected, all learned values are deactivated in the current Force Mode window. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 61 "For static pictures" or "For motion pictures". The current setting is then saved, and the slider set to the center of the control range. Once you have set the signal frequency optimally, you can continue with the adjustment. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 62 "For static pictures" or "Reset" can be selected in line 6 in the "Live mode" menu. Note: If the "Reset" setting is selected, all learned values are deactivated in the current Force Mode window. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 63 If no gray/blue area is visible on the top and bottom sides of the image, reduce the "Vertical resolution" until the gray/ blue area becomes visible. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 64 "Custom settings number". For example, if you have selected "1" as the "Cus- tom settings number", the 1st position of "Save custom settings" us set to "1". Saved timings can be overwritten at any time. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 65 If the motion image improvement is to be activated, the setting for this must be changed from "Inactive" to "Active" either in the "Servicelevel 2" → "Others" menu or in the "Blind mode" or "Live mode" of the Force Mode menu. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 66 "S-Video" and "Composite Video". The staircase signals can occur if a sig- nal source with motion image improvement is active in the main picture. See also Service level 2 functions [} 40] Live mode [} 58] SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 67: Operation

    Service if settings have to be changed. CAUTION If keys are locked contact service If the keys are locked, contact the service department to unlock them. Unlocking them yourself invalidates the warranty SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 68: Cleaning And Maintenance

    (70%) Aldehyde • Melsitt • Aldasan 2000 • Cidex • Kohsolin • Cidex (2.4% glutaraldehyde • Gigasept FF solution) Chlorine derivatives • Terralin Quartamon Med • Sodium hypochlorite (10%) SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 69 Forbidden cleaning agents and disinfectants Agent class Tested cleaning agents and disinfectants Peroxide compounds Perform Dismozon pur These cleaning agents and disinfectants can bleach the paint after a longer period of appli- cation. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 70: Troubleshooting

    "Auto adjust" panel Other information output via two-color LEDs Monitor status LED orange No fault; "Power down" was switched on and acti- vated. LED green Video signal recognized, no fault SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 71: Technical Specifications

    For SMD 19102 only: 6 CCFT (cold cathode fluorescent tubes) For SCD 19102 only: White LED backlight Lifetime of backlight Typically 45,000 hours (applies to an ambient temperature for the back- light of 25 °C) SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 72: Voltage Supply

    DVI-I socket, (analog pins are used) RGB signal • Video level: 0.5 ... 1.0 V • Sync level: TTL-compatible SoG signal • Video level: 0.5 ... 1.0 V • Sync level: 0.2 ... 0.3 V SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 73: Controls And Connectors

    2x 75 Ω/10 kΩ switch loop for H and V Rear panel (accessible without detaching con- • 1x power switch nection panel cover) • 1x RS 232 socket (6-pin mini-DIN socket) SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 74: Mechanical Design

    SMD 19102 D (without stand) 11.4 kg (± 0.5 kg) • SCD 19102 C (without stand) 4.7 kg (± 0.5 kg) • SCD 19102 CP (without stand, with front 5.3 kg (± 0.5 kg) pane) • SCD 19102 D (without stand) 9.7 kg (± 0.5 kg) Dimensions (W x H x D) in mm •...

  • Page 75: Mechanical Requirements

    The SCD / SMD 19102 C and SCD / SMD 19102 CP monitors are delivered without a stand. To ensure that a system comprising a monitor and base meet the requirements of standard EN 60601, select a stand for subsequent installation that meets this standard. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 76: Electromagnetic Compatibility

    3 V/m 80 % AM 1 kHz Noise immunity EN 61000-4-6 150 kHz ... 80 MHz 3 V/m 80 % AM 1 kHz Magnetic constant fields EN 61000-4-8 Max. 4000 A/m Magnetic alternating fields EN 61000-4-8 Max. 10 A/m SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 77: Dimensioned Drawings

    Dimensioned drawings 11.1 SCD / SMD 19102 C/CP (without stand) 11 Dimensioned drawings All dimensions in mm 11.1 SCD / SMD 19102 C/CP (without stand) 11.1.1 Front view SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 78: View From Left

    Dimensioned drawings 11.1 SCD / SMD 19102 C/CP (without stand) 11.1.2 View from left SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 79: Rear View

    Dimensioned drawings 11.1 SCD / SMD 19102 C/CP (without stand) 11.1.3 Rear view 11.1.4 View from above SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 80: Scd / Smd 19102 D (With Stand)

    Dimensioned drawings 11.2 SCD / SMD 19102 D (with stand) 11.2 SCD / SMD 19102 D (with stand) 11.2.1 Front view SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 81: View From Left

    Dimensioned drawings 11.2 SCD / SMD 19102 D (with stand) 11.2.2 View from left 11.2.3 View from above SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 82: Spare Parts / Accessories

    DVI transmission path. Digital graphics connection supports the transmission of high-quality video data. Using the DVI cable set from EIZO, this data can be transmitted over a distance of up to 36 m without any reduction in quality. The transmission set comprises a receiver and a transmitter that are connected over the CAT cable.
  • Page 83 Different cables and adapters allow problem-free integration of our monitors, even in ex- tremely complex systems. Product Order No. DVI cable, single link, 3 m 6GF6980-1TA07 BNC to VGA cable 6GF6980-1TB04 SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 84: Appendix

    From 1 march 2016: RCM marking, in accordance with Australian EMC stan- dards. (name plate). "On" symbol (voltage) (power switch) "Off" symbol (voltage) (power switch) Input for service calls. (PS2 socket) Symbol "Comply with the instruction manual". (device) SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 85: Warranty

    Please observe all local requirements and laws pertaining to the disposal of devices. 13.5 Additional devices Connected devices such as PCs must meet the relevant safety standards. 13.6 Contact Support during installation and for technical questions Medical Solutions http://www.eizoglobal.com SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 86: Trademarks

    13.7 Trademarks 13.7 Trademarks EIZO Logo is a registered trademark of EIZO Corporation in Japan and other countries. EIZO is a registered trademark of EIZO in Japan and other countries. RadiForce is a registered trademark of RadiForce in Japan and other countries.

  • Page 87: China Rohs (Restriction Of Hazardous Substances)

    EFUP shall be done in accordance with the Product Maintenance Procedures. This product must not be disposed of as unsorted municipal waste, and must be col- lected separately and handled properly after decommissioning. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 88 There is no risk, because the substance is integrated in the glass of the flat lamp.The flat lamps of the LCD Flat screen for medical backlights contain Mercury. The Mercury is in- side the CCFL tubes. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 89 EFUP shall be done in accordance with the Product Maintenance Procedures. This product must not be disposed of as unsorted municipal waste, and must be col- lected separately and handled properly after decommissioning. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 90 There is no risk, because the substance is integrated in the glass of the flat lamp.The flat lamps of the LCD Flat screen for medical backlights contain Mercury. The Mercury is in- side the CCFL tubes. SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 91: Disposal Of Materials Containing Mercury

    Ten produkt składa się z urządzeń mogących zawierać rtęć, która musi być poddawana re- cyklingowi lub składowana zgodnie miejscowym lub krajowym prawem. (Lampy podświetla- jące w wyświetlaczu monitora zawierają rtęć.) SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 92 Το συγκεκριμένο προϊόν περιλαμβάνει συσκευές που ενδέχεται να περιέχουν υδράργυρο, η ανακύκλωση ή απόρριψη του οποίου πρέπει να πραγματοποιείται σύμφωνα με τον τοπική, πολιτειακή ή εθνική νομοθεσία. (Στο συγκεκριμένο σύστημα, οι λυχνίες οπίσθιου φωτισμού στην οθόνη του μόνιτορ περιέχουν υδράργυρο) SCD 19102 / SMD 19102 Instructions for Use, 08/2015...

  • Page 93: Index

    Ventilation  15 General safety instructions  7 Video input  20, 73 Gray scale setting  13 Warranty  85 Live mode  59 Zero error rate  7 Mini-DIN socket  25 Motion image improvement  45, 66 SCD 19102 / SMD 19102 Instructions for Use, 08/2015...
  • Page 94 Siemensallee 84 76187 Karlsruhe Germany Instructions for Use, 08/2015 SCD 19102 / SMD 19102 A5E01588521A-006 Copyright © 2015 EIZO GmbH. All rights reserved.

This manual is also suitable for:

Smd 19102

Table of Contents