Eizo SCD 19102 Instructions For Use Manual page 14

Description
3.3 Performance features
Screen resolution
The monitor is equipped with an active 19" TFT display that has an extremely wide viewing
angle. The monitor offers maximum gray scale contrast across a very wide viewing angle
(in-plane switching (IPS) technology). The optimum screen resolution is 1280 x 1024 pixels.
Video signals with other resolutions, as are common in medical technology, are enlarged or
reduced to fit the screen size optimally. Alternatively, they can be displayed in their original
size (1:1).
RGB input (15-pin Sub-D/DVI/BNC)
SCD 19102
• The monitor is connected to the computer system using either the 15-pin Sub-D input
socket or the DVI-I input socket.
SMD 19102
• The monitor is connected to the computer system using either the 15-pin Sub-D input
socket, the BNC sockets or the DVI input socket (digital only).
If necessary, the monitor display is adapted using an OSD menu.
Video inputs
The SCD 19102 and SMD 19102 monitors have two additional analog video inputs. As a
result, the monitor can operate with standard analog video signals (PAL/NTSC). The RGB
and video inputs can be connected simultaneously to different signal sources.
Force Mode
Using the Force Mode function, the SCD 19102 and SMD 19102 monitors can be adapted
to special timing settings.
Protective glass
The SCD 19102 CP and SMD 19102 CP have anti-glare protective glass fitted over the top
of the LCD panel to protect the surface of the panel against bumps and scratches. The front
of the monitor is protected against moisture (IPx2 protection). The space between the pro‐
tective pane and the panel is sealed to prevent dust from entering, thus helping ensure the
internal surfaces remain clean.
Landscape and portrait modes
The device can be used in landscape and portrait modes. The image rotation for portrait
mode is made on the graphics card.
In portrait mode, the keypad is positioned at the top right and the OSD is not rotated (i.e. the
OSD inscription "Dynamic help for keypad function" is still positioned above the keys).
14
SCD 19102 / SMD 19102
Instruction for Use, 05/2013