Eizo SCD 19102 Instructions For Use Manual page 34

Start-up
6.3 Description of OSD menu
Main menu
Language
Others
34
Function
Auto position/phase/
frequency
Execute selected auto
functions
Frequency / phase (only for analog signal)
Frequency (only for
RGB signals)
Adjustment / setting
range
On / Off
Default: On
Execute
German, English
Default: English
1638 ... 1738
Instruction for Use, 05/2013
Description
This parameter can be
selected for the auto
function
With "On", the position,
phase, and frequency
are set when the "Auto
functions" are execut‐
ed.
With "Off", the position,
phase, and frequency
are not set when the
"Auto functions" are
executed.
The selected auto
functions are execut‐
ed
This sets brightness,
contrast, position, fre‐
quency and phase to
their optimum values.
The quality of the func‐
tion depends on the ap‐
plied image contents.
Use the "Language"
menu to select the
language of the OSD
menu
German or English can
be selected. English is
the delivery default set‐
ting.
You can set the fre‐
quency and phase of
the input signal
If the vertical lines are
still slightly fuzzy, adjust
the "Frequency/Phase"
setting.
Note: We recommend
displaying a vertical line
from the "Pixel On/Off"
test pattern.
SCD 19102 / SMD 19102