Eizo SCD 19102 Instructions For Use Manual page 11

IMPORTANT:
Extensive damage to property may result if the device is not connected correctly
That is why you should observe the warning information:
Transportation only in original packaging
Use the original packaging for transportation, and transport in the correct shipping position. Be sure
particularly to protect the monitor LCD module from shocks.
Care of device / cleaning agents
• Remove water drops immediately; extended contact with water discolors the surface.
• Only clean the surfaces using the cleaning agents referred to in the Instruction Manual.
• Monitor: The screen is extremely sensitive to mechanical damage. Absolutely avoid scratches,
shocks, etc.
What to do if the monitor is faulty
If the following conditions exist, the device must be disconnected from line power and checked by
qualified personnel:
• Damage to the plug or power cable.
• Following the entry of liquid into the device.
• If the device has been exposed to moisture.
• If the device does not function or if a fault cannot be corrected using the instruction manual.
• If the device has been dropped and/or the housing damaged.
• If the device smells of burning or produces peculiar noises.
Be aware of monitors aging
Note that monitors can fail as a result of aging, and that image properties such as brightness, con‐
trast, and color value can change.
Do not touch the monitor screen
Touching the screen can result in brief image distortions due to mechanical pressure or electrostatic
discharge.
SCD 19102 / SMD 19102
Instruction for Use, 05/2013
Safety instructions
2.1 General safety instructions
11