Table of Contents
Advertisement
Available languages
Available languages
Connecting Cables
Note
• Check that the monitor and the PC are powered off.
• When replacing the current monitor with a MS170 monitor, be sure to change the PC settings
for resolution and vertical frequency to those which are available for the MS170 monitor referring to
the resolution table (back of cover page) before connecting the PC.
Tips
• When connecting two PCs to the monitor, refer to the User' s Manual on the CD-ROM.
Power cord
1
Connect the monitor to the PC with a signal cable that matches the connectors.
After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.
Digital Input
Connectors on the monitor
Analog Input
Connectors on the monitor
2
Connect the USB cable when using RadiCS LE or ScreenManager Pro for
Medical.
Connecting to the Monitor
3
Plug the power cord into a power outlet and the power connector on the monitor.
4
Press
to turn on the monitor.
The monitor's power indicator lights up blue.
5
Turn on the PC.
The screen image appears.
When turning on the monitor and PC for the first time with the analog signal, the AutoAdjustment
function works to adjust the clock, phase, and display position automatically.
If an image does not appear, refer to "No-Picture Problem" (page.6) for additional advice.
USB cable
Digital/Analog signal cable
cable
Signal cable FD-C39
cable
Signal cable MD-C87
Connecting to a Computer
Connectors on the PC
Connectors on the PC
3
Advertisement
Table of Contents
