Icom IC-RSOOCOL Instruction Manual page 46

6
8 MEMORY CHANNELS
8-5 MEMORY CLEARING There are 2 ways to clear a memory channel: clearing in the
operating frequency section and in the memory list screen.
(1) IN THE OPERATING 1) Select the memory channel to be cleared.
FREQUENCY SECTION © Use the keyboard or the [DN UP] selector.
er 2) Push and hold the [CLEAR] switch until the memory is
cleared.
(2) IN THE MEMORY LIST 1) Access the memory list screen:
SCREEN - Push [F-2] "MEMO" when the menu 1 screen is
displayed.
2) Push and hold [F-1] "ROLL" then rotate the main dial
to select the desired memory channel.
3) Push and hold the [CLEAR] switch until the memory
on the memory list screen is cleared.
The memory on the operating frequency section is not
erased.
@MEMORY CLEARING IN THE MEMORY LIST SCREEN
PMID men
1296.880.00 ssau
TS 2O.Obm
7 HID me
1296.880.00 ssax
TS 2O.Ohke
Memory channel selected "ROLL" with The memory contents in the memory list
the main dial, screen are cleared.