Icom IC-RSOOCOL Instruction Manual page 63

MAINTENANCE 11
™ FREQUENCY AND MEMORY SETTING
- — — eae
® Main dial does not function,
*[LOCK] switch does not
Jock the keyboard, LCD
function switches, etc.
@ Internal LOCK switch is set at "DIAL." Set the internal LOCK switch to,
"PANEL."
©The main dial click does not | @ Internal CLICK switch is set to "OF F."" © Set the internal CLICK switch to "AUTO."
function.
@The selected frequency is
erased.
@The memory channel is changed before
writing into memory.
Write into memory when you change the p. 33
memory channel,
@ Use the [MEMORY BANK] switch or set
the memory bank to "'NO-BANK.""
Memory channels in another
100-unit channel cannot be
@ The memory bank is set at "BANK."
@ SCANNING
E i
Turn [SQUELCH] CW until noise disap- 46
pears.
@Program the scan edge frequencies or
select the programmed scan group,
Select the slow tuning step or wider AF
width.
Program the memory with the same mode
or select the bank programmed with the
same mode.
Programmed scan and auto
memory write scan do not
function.
The scan edge frequencies of the selected
scanning group are not programmed.
@ The tuning step is wider than AF width.
The same mode channels are not program:
med in the operating bank,
@ AF scan does not function,
® Selected mode memory scan
does not function.
Memory scan does not func-
tion,
Memory scan bank is set to "BANK" and | @Change to another memory channel or set
the operating memory channel is in a the memory scan bank to "'NO-BANK.""
programmed scan edge channel,
Selected number memory
scan does not function,
The same scan numbers are not program-
med in the operating bank.
@Program the memory with the same
number or select the bank programmed
with the same mode,
®Auto memory write scan
not function.
@All memory channels 900 ~ 999 are | @Move the contents of memory channels to
Programmed. other memory channels or push and hold
the [AUTO] switch,
© [TIMER] is not pushed IN.
SEL" is not pushed on the daily timer.
Push [TIMER] IN.
Push [F-2] "SEL" when the daily timer
set (1) screen is displayed.
eTimer does not function
even when the timer has
been set.
Programmed contents are cleared by CPU
resetting.
® Set the time of the daily timer again.
©The daily timer [2] is shown
in the SEL" area does not
function.
@ The OFF time of [1] timer is set later than| @ Set the time of the daily timer again.
the ON time of the [2] timer.
11-2 CLEANING If the receiver becomes dusty or dirty, wipe it clean with a
dry, soft cloth.
AVOID the use of strong chemical agents such as benzine
or alcohol, as they may damage the receiver's surfaces.