Icom IC-RSOOCOL Instruction Manual page 5

MULTI-SCAN FUNCTIONS
SCANNING PAUSE, TIMER AND
VSC (Voice Scan Control)
ADDITIONAL OUTSTANDING FEATURES
FEATURES 1
PROGRAMMED SCAN
Scans between pre-programmed scan edges.
MEMORY SCAN
Scans memory channels.
SELECTED NUMBER MEMORY SCAN
Scans memory channels with the same programmed
selected number.
SELECTED MODE MEMORY SCAN
Scans memory channels with the same programmed
mode.
PRIORITY SCAN
Monitors specified memory channels.
AF SCAN
Scans around the receiving frequency.
AUTO MEMORY WRITE SCAN
Programs receive frequencies into memory channels
during programmed scan.
Also, a newly developed audio detecting VSC system allows
you to skip inconvenient signals such as signals with no
modulation, beat signals, and noise component signals.
*A wide variety of tuning steps. 10 Hz, 100 Hz, 1 kHz,
5 kHz, 9 kHz, 10 kHz, 12.5 kHz, 20 kHz, 25 kHz and
100 kHz available.
Automatic dial click functions when more than 5 kHz
tuning steps are selected.
Built-in ODS (Direct Digital Synthesizer) for high-speed
scanning with a high C/N (Carrier-to-Noise) ratio.
excellent sensitivity for all frequency coverages with a
high dynamic range of 103.5 dB*.
* On 14 MHz band, CW mode, filter narrow.
© Dual clock, 2 kinds of sleep timers and 5 indpendent daily
timers.
*eAn advanced AFC (Auto Frequency Control) for auto-
matic tuning of the center frequency of the receive signal.
*A threshold-adjustable, width-selectable noise blanker.
Advanced interference rejection circuits, IF shift and
notch filter.
Recording control through a tape recorder with optional
frequency recording.
CI-V control system,
Rack mounting handles for mounting with a 19-inch rack.