Scanning; Pre-Operation - Icom IC-RSOOCOL Instruction Manual

a
9
9-1 PRE-OPERATION
SCANNING
(1) SCAN TYPES
®@PROGRAMMED SCAN (p. 47)
Scan e
Scan edge dge
P2 or PI
Lower freq. P1 or P2 Higher freq.
Repeatedly scans between two user-programmed scan
edges. The scan edges can be programmed up to 10 groups
{20 channels). You can select one of 10 groups to search
for a signal.
®AF SCAN (p. 50)
Higher freq. Lower freq. —Af Operating frequency +Af
Scanning
emma';
Jump
Repeatedly scans AF width around an operating fre-
quency.
®@SELECTED MODE MEMORY SCAN (p. 52)
ch 999 ch7 ché
Repeatedly scans memory channels with the same selected
operating mode.
®@AUTO MEMORY WRITE SCAN (p. 54)
Scan edge When a signal
Pt or P2\ received
— «= Scaniedge
Seennna ane n nn P2or PI
Scans the same way as programmed scan. However, when
a signal is received the received frequency and received
time are automatically written in a memory channel of
900 ~ 999 in sequence.
The IC-RSOOOL has 7 different scan functions, providing
tremendous scanning versatility at the touch of just a few
switches.
®@PRIORITY SCAN (p. 49)
Receive
frequency
Priority channel
Watches a particular memory channel during operation,
Priority channels can be set for one channel in each me-
mory bank and for one channel that ignores the memory
bank.
@MEMORY SCAN (p. 51)
Ch 2-—+Coh 3+ Ce
<r Gh
Gh 999)* --Coh 7 )-— Cen
Repeatedly scans all memory channels. The scanning
range can be programmed.
Repeatedly scans memory channels with the same pro-
grammed number.