Icom IC-RSOOCOL Instruction Manual page 43

(3) USING THE MEMORY LIST
SCREEN
e"ROLL" and "SET"
™ no owe
845.000.00 ssom
TS 2S5.0en
Perc}
73° SEL NOTE
"ROLL" is helpful when checking the memory channels while
keeping the operating frequency.
® Memory writing and clearing can be performed on the memory
list screen,
(4) MEMORY BANK
usB MID BANK
2,000.00 oaoom
Ts 10 nw
[BANK STATUS]
M-CH =) Memory Channels
MEMO =) Memory Scan
PRIO => Priority Scan
ar) ee] PE] CC be)
MEMORY BANK STATUS SCREEN
MEMORY CHANNELS &
The memory list screen shows 10 of the 1000 memory
channels at one time.
1) Access the memory list screen:
- Push [F-2] "MEMO" when the menu 1 screen is
displayed.
2) Select the desired memory bank (100-unit channel
number) using the [MEMORY BANK] | switches,
[DOWN] or [UP].
© See (4) MEMORY BANK below for details.
3) Push and hold [F-1] "ROLL" or [F-2] "SET" then
rotate the main dial.
See the displays below for details.
4) To return to the menu 1 screen, push [F-6] "MENU."
Mio ween
845.000.00 ssom
TS 25.0hK
"SET" is helpful for instant selection of a memory channel.
@ The memory channel in the operating frequency section is also
changed.
1000 memory channels are separated by 10 groups (banks)
for quick searching in a group. The status of "BANK" or
"NO-BANK" is displayed on the right top of the CRT
display.
eSelect "BANK" when you require memories to be
separated,
Select "NO-BANK" when you do not require memories to
be separated (every memory channel can be scrolled
without using the [MEMORY BANK] switches),
1) Access the memory bank status screen:
- Push [F-4] 'BANK' when the menu 2 screen is
displayed.
2) Push [F-1] "M-CH" to select "BANK" or "NO-BANK"
status.
3) Push [F-6] "MENU" to return to the menu 1 screen,
|