Icom IC-RSOOCOL Instruction Manual page 60

a
10 clock AND TIMER OPERATION
10-3 DAILY TIMER
(1) PROGRAMMING A DAILY TIMER
DAILY TIMER (2) SCREEN
1999.800.00 soc
TS 25.Okn
[DAILY TIMER SET] with MAIN DIAL
CK SEL. DAY ON OFF Mch
0100
0:00
--- 0100
FRI 15100
& —-—- 0:00
F —-——- 0300
Sets the memory channel which
will appear when the timer is ON.
Sets the OFF time.
Sets the ON time.
Sets the day in a week.
(2) OPERATING THE DAILY TIMERS
[DAILY TIMER SET] with MAIN DIAL
DAILY TIMER (1) SCREEN
5 programmed daily timers turn the receiver ON and OFF.
The programmable contents include the day, ON/OFF time
and memory channel you want receive in.
1) Access the clock & timer screen:
- Push [F-4] "TIME" when the menu 1 screen is dis-
played.
2) Push [F-2] "TIMER" to select the daily timer set (1)
screen.
3) Push and hold [F-1] "CH" then rotate the main dial to
select one of 5 timers.
4) Push [F-3] "SET" to set the timer contents on the
selected timer.
¢ The daily timer (2) screen appears.
5) Push and hold one of [F-1]~[F-4] then rotate the main
dial to set your desired timer contents as shown in the
diagram at left.
6) To program blank status, push and hold [F-5] "BLANK"
and push the desired key: "DAY," "OFF" or ""Mch."
When "DAY" is blank, the timer activates every day.
eWhen "OFF" is blank, the timer functions as power
ON only.
When ''Mch" is blank, the displayed frequency appears
at the timer ON.
7) Push [F-6] "SET" to return to the daily timer set (1)
screen.
8) Program another daily timer (begin again from step 3)
or push [F-6] "MENU" to return to the menu 1 screen.
1) Access the daily timer set (1) screen:
~ See (1) PROGRAMMING A DAILY TIMER step 1 and
2 above.
2) Push and hold [F-1] 'CH' then rotate the main dial to
select the desired timer.
3) Push [F-2] "SEL" to activate the timer.
¢ The activated timer lights at a bright intensity.
ePriority number appears in "SEL" area depending on
programmed time.
4) Repeat steps 2 and 3 when activating another timer
simultaneously.
5) Push IN the [TIMER] switch on the front panel.
6) Push [F-6] "MENU" to start the daily timer function.
e After several seconds, power automatically turns OFF
and will turn ON again at the programmed ON time.
When the sleep timer is programmed, power will turn
OFF after sleep time finishes.