Fuji Xerox DocuCentre SC2020 Service Manual page 820

DC SC2020
Version 1.1
Figure 13 j0bs91040
19. Load paper into Tray 2.
20. Paste the Size Label that correspond to the paper that is loaded in Tray 2. (Figure 14)
(1) Paste the Size Label.
Figure 14 j0bs91038
21. Reconnect all the cables that are supposed to be connected to the right of the IOT.
22. Plug the power cord into power outlet, and turn ON the power switch.
23. Check the operation of the One Tray Module.
24. Explain to the customer how to operate the One Tray Module where necessary.
05/2014
9-22
9.1.5 Fax Kit
Product Code
• EC102680
Installation Procedures
1. Check the bundled items. (Figure 1)
Table 1
No Name
1 Fax
2 Wire Harness
3 Core
4 Screw(M3x6)
5 Fax Kit Installation Guide
6 PTT Label
• No illustration description for Item 4, 5, 6
2. Turn OFF the Power Switch and make sure that power-saving LED and screen display turn OFF.
When turning OFF the power switch, check that the "Data" lamp is OFF and that there is no job in
progress.
3. Unplug the Power Plug.
When maintaining the machine, turn OFF the power switch and unplug the power plug.
4. Remove the Right Cover. (Figure 2)
(1) Remove the Screw (2).
(2) Remove the Right Cover in the direction of the arrow.
Installation/Removal
Qty
1
1
2
3
1
1
Figure 1 j0bs91018
CAUTION
WARNING
9.1.5 Fax Kit