Fuji Xerox DocuCentre SC2020 Service Manual page 819

12. Hold onto the IOT at the indicated positions (A: x4) and align it to the positioning pin (x2) of the One
Tray Module to mount it. (Figure 9)
Figure 9 j0bs91030
13. Pull out and remove Tray 1.
14. Secure the One Tray Module to the IOT by using the Docking Screw (x2) in the kit. (Figure 10)
(1) Secure them by using the Docking Screw (x2).
Figure 10 j0bs91036
Version 1.1
DC SC2020
15. Reinstall Tray 1.
16. Fix Docking Bracket in the kit with Docking Screw in the kit. (Figure 11)
(1) Install the Docking Bracket.
(2) Secure them by using the Docking Screw.
17. Connect the connector of the One Tray Module. (Figure 12)
(1) Connect the connector.
(2) Install the cable band.
18. Install the STM Connector Cover. (Figure 13)
(1) Install the STM Connector Cover.
(2) Secure it by using the screw.
05/2014
9-21
Figure 11 j0bs91037
Figure 12 j0bs91039
9.1.4 One Tray Module
Installation/Removal