Print Area; Alignment Specification - Fuji Xerox DocuCentre SC2020 Service Manual

6.1.21 Print Area

6.1.21.1 Paper Sizes that Can be Transported
The minimum and maximum paper sizes that can be transported in the Main Unit are as follows:
• Minimum transportable paper size: Width 88.9mm x Length 98.4mm
• Maximum transportable paper size: Width 297.0mm x Length 432.0mm *1
*1: When non-standard envelope size is printed on or copied on, the operation by the user is to be "Set-
ting, on which flap portion is not included in size in paper feed direction".
• When the printer detects that an envelope is carried in, control with the size of the paper feed direc-
tion set in the UI with 60mm added as the flap portion.
• If the paper feed direction size set in the UI added with 60mm is greater than the maximum paper
feed direction size (432mm), do not scale it to fit into the maximum paper feed direction size
(432mm).
• If the paper feed direction size set in the UI added with 60mm is greater than the maximum paper
feed direction size (432mm), it operates at the same productivity as the maximum paper feed direc-
tion size (432mm).
Item
Lead Registration
Side Registration
Lead Skew (200 mm)
Side Skew (400 mm)
Horizontal Reduce/Enlarge Precision (All area) (280 mm)
Applicable for 100%
Horizontal Reduce/Enlarge Precision (All area) (280 mm)
Applicable for 25 to 200%
Horizontal Reduce/Enlarge Precision (All area) (280 mm)
Applicable for 201 to 400%
Vertical Magnification Ratio Precision (All area) (400 mm)
Applicable for 100%
Vertical Magnification Ratio Precision (All area) (400 mm)
Applicable for 25 to 200%
Vertical Magnification Ratio Precision (All area) (400 mm)
Applicable for 201 to 400%
Version 1.1
DC SC2020
Table 1
SYSTEM Spec *1 (Platen)
Tray MSI *2 SYSTEM Spec (DADF)
+/-2.1mm +/-2.7mm +/-2.6mm
+/-2.5mm - +/-2.9mm
+/-2.2mm +/-3.1mm +/-2.9mm
+/-2.6mm - +/-3.2mm
+/-1.7mm +/-2.2mm +/-2.3mm
+/-2.2mm - +/-2.7mm
+/-3.3mm +/-4.2mm +/-4.6mm
+/-4.2mm - +/-5.4mm
+/-0.7% - +/-1.2%
+/-0.7% - +/-1.2%
+/-1.4% - +/-2.4%
+/-1.4% - +/-2.4%
+/-2.8% - +/-4.8%
+/-2.8% - +/-4.8%
+/-0.7% - +/-1.2%
+/-0.7% +/-1.2%
+/-1.4% - +/-2.4%
+/-1.4% - +/-2.4%
+/-2.8% - +/-4.8%
+/-2.8% - +/-4.8%
6.1.21.2 Maximum Printable Area
The printable area defines the area where the image can be printed. The maximum printable area of the
Main Unit is as follows.
• Maximum printable area during Print Job: Width: 291.0mm, Length: 425.8mm
• Maximum printable area during Copy Job: Width: 291.0mm, Length: 425.8mm
(Platen and DADF both)
6.1.21.3 Guaranteed Print Area
The area where the image quality is guaranteed is referred to as Print Guaranteed Area. The Print Guar-
anteed Area of the Main Unit is as follows.
• Maximum guaranteed printing area during Print Job: Width: 289.0mm, Length: 423.4mm
• Maximum guaranteed printing area during Copy Job: Width: 289.0mm, Length: 423.4mm
(Platen and DADF both)
However, this print area is fully applied only when the Print Job and Copy Job uses paper with size A3
SEF in width or 11x17" SEF in length.

6.1.22 Alignment Specification

IOT (non-consolidated) (Reference)
Tray MSI*2
+/-1.9mm +/-2.6mm
+/-2.3mm -
+/-2.0mm +/-3.0mm
+/-2.4mm -
+/-1.5mm +/-2.0mm
+/-2.0mm -
+/-3.0mm +/-4.0mm
+/-4.0mm -
+/-0.6% -
+/-0.6% -
- -
- -
- -
- -
+/-0.6% -
+/-0.6% -
- -
- -
- -
- -
05/2014
6-21
IIT (non-consolidated) DADF (non-consolidated)
+/-0.7mm +/-1.5mm
- +/-1.5mm
+/-0.75mm +/-1.5mm
- +/-1.5mm
+/-0.8mm +/-1.0mm
- +/-1.0mm
+/-1.2mm +/-2.2mm
- +/-2.0mm
+/-0.31% +/-0.5%
- +/-0.5%
- -
- -
- -
- -
+/-0.31% +/-0.5%
+/-0.5%
- -
- -
- -
- -
6.1.21 Print Area
General