Fuji Xerox DocuCentre SC2020 Service Manual page 809

Figure 8 j0bs91026
13. Paste the DADF Label with the applicable country languages. (Figure 9)
(1) Paste the DADF Label.
Figure 9 j0bs91027
14. Reinstall the parts that were removed in Steps 9, 10, and 11.
15. Plug the power cord into power outlet, and turn ON the power switch.
16. Upgrade the Main Unit Controller and DADF Firmwares to the latest version.
17. Check the operation of the DADF and perform adjustments as required.
18. Explain to the customer how to operate the DADF where necessary.
Version 1.1
DC SC2020
9.1.3 Duplex
Product Code
• EC102679
Installation Procedures
1. Check the bundled items. (Figure 1)
No Name
1 L/H Cover
2 Motor Wire Harness
3 Inverter Motor
4 Gear
5 Screw (M3x6)
6 Duplex Set Up Instruction
• There is no illustration for Item 6
2. Remove screw, packaging tapes and materials from L/H Cover. (Figure 2)
(1) Remove screw, Tag.
(2) Remove the packaging tape.
(3) Remove the packaging materials.
05/2014
9-11
Table 1
Qty
1
1
1
1
2
1
Figure 1 j0bs91001
Installation/Removal
9.1.3 Duplex