Fuji Xerox DocuCentre SC2020 Service Manual page 454

DC SC2020
Version 1.1
Chain-Link NVM Name
744-019 Fusing Motor Speed Fine Adjustment
(63[mm/s]/Heavyweight2,Labels2,Envelope)
744-020 Fusing Motor Speed Fine Adjustment
(63[mm/s]/HW Gloss)
744-021 Fusing Failure Individual Support Mode Shift Tem-
perature Plain 1
744-022 Fusing Failure Individual Support Mode Shift Tem-
perature Plain 2
744-023 Fusing Failure Individual Support Mode Shift Tem-
perature - Heavyweight
744-024 Fusing Failure Individual Support Mode Shift Tem-
perature - Extra Heavyweight
744-025 Toner Blocking Countermeasure Applied Paper
Type (Plain)
744-026 Toner Blocking Countermeasure Applied Paper
Type (Heavyweight BW)
744-027 Toner Blocking Countermeasure Applied Paper
Type (Heavyweight FC)
744-028 Toner Blocking Countermeasure Applied Paper
Type (Extra Heavyweight)
744-029 Toner Blocking Countermeasure Interval Adjust-
ment Value
(126mm/s)
744-030 Toner Blocking Countermeasure Interval Adjust-
ment Value
(63mm/s)
744-031 HFSI Warning Threshold Value
05/2014
6-56
Table 1 NVM 744_Fusing Unit List
Default Minimum Maximu
Value value m value Description
-465 -600 600 NVM for Fusing Motor Speed Fine Adjustment. Adjust by setting the division ratio.
(63[mm/s]/Extra Heavyweight) (-0.2%)
-465 -600 600 NVM for Fusing Motor Speed Fine Adjustment. Adjust by setting the division ratio.
(63[mm/s]/HW Gloss) (-0.2%)
5 0 20 The shift temperature for run temperature
1 count = 1 [Degree]
5 0 20 The shift temperature for run temperature
1 count = 1 [Degree]
5 0 20 The shift temperature for run temperature
1 count = 1 [Degree]
5 0 20 The shift temperature for run temperature
1 count = 1 [Degree]
0 0 255 Specify the combined bits for the paper types to apply the countermeasure.
0: Do not apply, 1: PlainA, 2: PlainB, 4: PlainC, 8: PlainD, 16: PlainE, 32: PlainF,
64: PlainG, 128: Plain S
0 0 63 Specify the combined bits for the paper types to apply the countermeasure.
0: Do not apply, 1: Heavyweight1A (BW), 2: Heavyweight1B (BW), 4: Heavyweight
C (BW)
8: Heavyweight1S (BW), 16: Gloss1 (BW), 32: Labels (BW)
0 0 63 Specify the combined bits for the paper types to apply the countermeasure.
0: Do not apply, 1: Heavyweight1A (FC), 2: Heavyweight1B (FC), 4: Heavyweight
C (FC)
8: Heavyweight1S (FC), 16: Gloss1 (FC), 32: Labels (FC)
0 0 127 Specify the combined bits for the paper types to apply the countermeasure.
0: Do not apply, 1: Heavyweight2A (Include envelopes), 2: Extra Heavyweight B, 4:
Extra Heavyweight C,
8: Extra Heavyweight D, 16: Extra Heavyweight S, 32: HW Gloss, 64: Heavyweight
Labels
0 0 50000 Interval adjustment value
1count=1[ms]
0 0 100000 Interval adjustment value
1count=1[ms]
400000 0 1200000 Notifies the time for Fusing Unit replacement
Warning Value = HFSI Threshold Value - HFSI Warning Threshold Value
General
6.3.7 NVM 744_Fusing Unit List
Write
Allowed/ Can be
Unit Protected initialized
- O O
- O O
1 O O
[degree]
1 O O
[degree]
1 O O
[degree]
1 O O
[degree]
- O O
- O O
- O O
- O O
1 [ms] O O
1 [ms] O O
- O O