033-500 FAX RX JPEG Data Limit Over
BSD-ON:-
In FAX receive, JPEG encode data volume exceeds system data.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. Turn the
power off and on to check that the error recurs. Then,update to the latest F/W.
033-501 Fax Codec Error
BSD-ON:-
Cancel Codec processing due to error of read part during manual send.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. Turn the
power off and on to check that the error recurs. Then,update to the latest F/W.
If the problem cannot be solved, replace the ESS PWB.
033-502 File Open Error
BSD-ON:-
File open error.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. Turn the
power off and on to check that the error recurs. Then,update to the latest F/W.If the problem cannot be
solved, replace the ESS PWB.
(PL
18.2)
033-503 Memory Full
BSD-ON:-
In receive, memory full.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. -Wait until
the Pending FAX Jobs will be sent. Or delete the Pending FAX data. -Try dividing the FAX data into
smaller blocks or converting the data to a smaller format. -Update to the latest F/W. If the error persists
after the action above is taken, ensure that the error replicates after the printer is powered off and then
on, and then replace the following parts in sequence.
•
FAX PWB
(PL
18.5)
•
ESS PWB
(PL
18.2)
Version 1.1
DC SC2020
(PL
18.2)
033-510 Fax Codec Error
BSD-ON:-
In JBIG data decode, error in the number of decode line in one stripe.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. Turn the
power off and on to check that the error recurs. Then,update to the latest F/W. If the problem cannot be
solved, replace the following parts in sequence.
•
FAX PWB
(PL
18.5)
•
ESS PWB
(PL
18.2)
033-511 Fax Codec Error
BSD-ON:-
Result of MH,HR,MMR receive decode is 0Line.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. -Checking
the telephone line connection. Reconnect the telephone line connector. -Checking the receiving side fax.
Send the fax data to known good fax machine. -Update to the latest F/W. If the error persists after the
action above is taken, ensure that the error replicates after the printer is powered off and then on, and
then replace the following parts in sequence.
•
FAX PWB
(PL
18.5)
•
ESS PWB
(PL
18.2)
033-512 Fax Communication Error
BSD-ON:-
Modem Parameter Exchange Error.
Cause/Action
Recover after the [OK] or [Close] button is pressed or message is displayed for specified time. -Checking
the telephone line connection. Reconnect the telephone line connector. -Checking the sending side fax.
Receive the fax data from known good fax machine. -Update to the latest F/W. If the error persists after
the action above is taken, ensure that the error replicates after the printer is powered off and then on, and
then replace the following parts in sequence.
•
FAX PWB
(PL
18.5)
•
ESS PWB
(PL
18.2)
033-513 Fax Communication Error
BSD-ON:-
05/2014
2-49
CHAIN 33
Troubleshooting