T_Faxcom Data Receive I/F Error; Jbig Parameter Error; Mhr Parameter Error; Mhr Encode Error - Fuji Xerox DocuCentre SC2020 Service Manual

133-231 T_FAXCOM Data Receive I/F Error

BSD-ON:-
T_FAXCOM<->Data processing I/F error.
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

133-234 JBIG Parameter Error

BSD-ON:-
JBIG parameter error.
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

133-235 MHR Parameter Error

BSD-ON:-
MHR parameter error.
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

133-236 MHR Encode Error

BSD-ON:-
MHR encode error.
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
Version 1.1
DC SC2020
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

133-237 MHR Input Buffer Error

BSD-ON:-
Data error of MHR input buffer.
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

133-238 MHR Output Buffer Error

BSD-ON:-
Data error of MHR output buffer.
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

133-239 FAX ECM Buffer Address Error

BSD-ON:-
At FAX send/receive, address to get from and write in ECM buffer is wrong.
Cause/Action
Turn the power off and on to check that the error recurs. Then,update to the latest F/W. If the problem
cannot be solved, replace the following parts in sequence.
• FAX PWB (PL 18.5)
• ESS PWB (PL 18.2)

133-240 Resolution Change Error

BSD-ON:-
Resolution error in FAX send resolution conversion.
05/2014
2-117
CHAIN 133
Troubleshooting