Fuji Xerox DocuCentre SC2020 Service Manual page 268

DC SC2020
Version 1.1
Figure 6 j0bs41706
8. Remove the Bearing on the Rear side. (Figure 7)
(1) Remove the E-Clip.
(2) Remove the Bearing.
Figure 7 j0bs41707
9. Remove the Bearing , Exit Roll on the Front. (Figure 8)
(1) Remove the Bearing.
(2) Remove the Exit Roll.
05/2014
4-66
Figure 8 j0bs41708
Replacement
1. To install, carry out the removal steps in reverse order.
2. When installing the Exit Cover, insert the Boss of Rear Exit
Cover into the mounting hole. (Figure 9)
Figure 9 j0bs41704
Disassembly/Assembly and Adjustment
17. Exit