[2 Sided Report]
2 Sided Report
[Print Area]
Print Area
[Banner Settings]
Banner Sheet
Banner Tray
174
5 Control Panel Settings
System Settings
2 Sided Report
Setting
Sets whether or not to print reports and lists either 1-sided or 2-sided.
• [1 Sided] (default)
• [2 Sided]
System Settings
Print Area
Setting
Sets whether or not to extend the print area. This item is enabled when printing
by emulation (HP-GL/2, ESC/P, PCL) or in PostScript.
• [Standard] (default)
• [Extended]
System Settings
Banner Settings
Setting
Sets whether or not to insert banner sheets.
• [Off] (default)
Does not output banner sheets.
• [Start Sheet]
Outputs a banner sheet at the beginning of a document.
• [End Sheet]
Outputs a banner sheet at the end of a document.
• [Start & End]
Outputs banner sheets at the beginning and end of a document.
Sets the paper tray to be used for printing banner sheets.
• [Tray 1] (default)
• [Tray 2] to [Tray 4], [Tray 6]
Note
• Tray 2 to 4 and Tray 6 are optional. The display only shows the trays that are
actually installed on the printer.
Description
Description
Banner Settings
Banner Sheet
Banner Settings
Banner Tray
Banner Settings
Driver Settings
Description