Allen-Bradley AB QUALITY ControlLogix 1756 Series User Manual page 94

Initiate ControlNet to DH+ Communication With an Ethernet Backbone
The RSWho window will appear.
e. Drill down the tree and double-click on the PLC-5/40C processor at
ControlNet node 1.
f. When the System Communications tab reappears, click on the Online
button.
g. If no program is loaded in the PLC-5/40C processor, a pop-up window
will appear with the message "You cannot go Online to DEFAULT
program." Enter a new processor name of your choice (e.g.,
"EXAMPL10") and click on OK.
• It is not necessary to save the program.
• Disregard any warnings about Control Net devices.
Publication 1756-6.5.13 - September 1999
10-11