Allen-Bradley AB QUALITY ControlLogix 1756 Series User Manual page 37

Initiate DH+ to DH+ Communication Via a Single Gateway Module
The RSWho window will appear.
c. Drill down the tree and double-click on the PLC-5/40C processor at
node 10.
d. When the System Communications tab reappears, click on the
Download button.
Disregard any warnings about Control Net devices.
e. Save the program if prompted.
f. Go Online and change the processor mode to Run.
Verify the communications to the PLC-5/40C processor at node 1:
a. Start a new session of RSLogix5 software.
b. From the Comms menu in RSLogix5, select System Comms.
Publication 1756-6.5.13 - September 1999
5-7