Allen-Bradley AB QUALITY ControlLogix 1756 Series User Manual page 9

ii
Initiate DH+ to DH+
Communication Via Two
Gateway Modules
Initiate Ethernet to DH+
Communication
Initiate ControlNet to
ControlNet Communication
Initiate ControlNet to DH+
Communication With an
Ethernet Backbone
Publication 1756-6.5.13 - September 1999
Chapter 6
What You Need To Do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
Verify the 1756-DHRIO Module Node Addresses. . . . . . . . . . . . 6-1
Verify the KTX Driver Configuration . . . . . . . . . . . . . . . . . . . . . 6-1
Test the KTX Driver and System Hardware Setup. . . . . . . . . . . . 6-2
Configure the Routing Table in the 1756-DHRIO Modules. . . . . 6-3
Test the Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6
Chapter 7
What You Need To Do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
Verify the KTX Driver Configuration . . . . . . . . . . . . . . . . . . . . . 7-1
Test the KTX Driver and System Hardware. . . . . . . . . . . . . . . . . 7-2
Configure the Communication Modules. . . . . . . . . . . . . . . . . . . . 7-3
Connect to the PLC-5/40C Processor . . . . . . . . . . . . . . . . . . . . . . 7-6
Chapter 8
What You Need To Do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
Verify the Communication Module Node Addresses . . . . . . . . . . 8-2
Verify the PLC-5/40C Processor Node Addresses . . . . . . . . . . . . 8-2
Verify the KTX Driver Configuration . . . . . . . . . . . . . . . . . . . . . 8-2
Test the KTX Driver and System Hardware Setup. . . . . . . . . . . . 8-2
Routing Table Considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3
Edit the Message Instruction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3
Test the Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6
Chapter 9
What You Need To Do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
Verify the Communication Driver Configurations . . . . . . . . . . . . 9-1
Test the KTX Diver and System Hardware Setup . . . . . . . . . . . . 9-2
Configure the Communication Modules in the Left Chassis . . . . 9-3
Configure the Communication Modules in the Right Chassis . . . 9-8
Test the Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-14
Chapter 10
What You Need To Do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
Verify the Communication Driver Configuration. . . . . . . . . . . . 10-1
Test the KTX Driver and System Hardware Setup. . . . . . . . . . . 10-2
Configure the Communication Modules in the Left Chassis . . . 10-3
Configure the 1756-ENET Module in the Right Chassis . . . . . . 10-8
Test the Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-10