Allen-Bradley AB QUALITY ControlLogix 1756 Series User Manual page 64

8-8 Initiate ControlNet to ControlNet Communication
Verify that the AB_KT-1
driver is selected.
Verify that the Reply Timeout is
set to a minimum of 10 seconds.
Publication 1756-6.5.13 - September 1999
Verify the communications to the PLC-5/40C processor at ControlNet
node 2:
a. Start a new session of RSLogix5 software.
b. From the Comms menu in RSLogix5, select System Comms.
The System Options window will appear with the System
Communications tab open.
c. Click on Who Active.
The RSWho window will appear.
d. Drill down the tree and double-click on the PLC-5/40C processor at
ControlNet node 2.