10-10
Initiate ControlNet to DH+ Communication With an Ethernet Backbone
Publication 1756-6.5.13 - September 1999
Test the Application
Start the RSLogix5 software:
a. From the Windows NT Start menu, select Programs.
b. Select Rockwell Software > RSLogix5 English
OR
Double-click on:
Verify the PLC-5 Processor at ControlNet Node 1 is Active:
c. From the Comms menu in RSLogix5, select System Comms.
The System Options window will appear with the System
Communications tab open.
d. Select TCP-1 as the Driver and click on Who Active.