Test The Application - Allen-Bradley AB QUALITY ControlLogix 1756 Series User Manual

This message writes the value of the
seconds clock (S:23) in the PLC-5/40C at
node 10 into data file N7:0 of the PLC-5/40C
processor at node 1.
Initiate DH+ to DH+ Communication Via a Single Gateway Module

Test the Application

To test the application, send a message from one PLC-5/40C processor to
the other PLC-5/40C processor.
Start the RSLogix5 software:
a. From the Windows NT Start menu, select Programs.
b. Select Rockwell Software > RSLogix5 English
OR
Double-click on:
Load the example program:
a. From the File menu, open the program "example." See page 4-2.
b. In the MSG instruction, double-click on Setup Screen.
Publication 1756-6.5.13 - September 1999
5-5