Configure The Communication Modules In The Left Chassis - Allen-Bradley AB QUALITY ControlLogix 1756 Series User Manual

Table of Contents

Advertisement

You must make sure that each Ethernet
device has a unique IP address. For more
information, see page 7-3.
Make sure Bootp is disabled.

Configure the Communication Modules in the Left Chassis

Start the configuration software:
a. From the Windows NT Start menu, select Programs.
b. Select ControlLogix Gateway > 1756gtwy.
Configure the Ethernet module in the left chassis:
a. From the File menu in the configuration software, select Browse
Network. RSLinx starts.
b. Select the AB_KT_1 Data Highway Plus driver and drill down the
backplane.
c. Double-click on the Ethernet module.
d. Select the Port Configuration tab.
Publication 1756-6.5.13 - September 1999
9-3

Advertisement

Table of Contents
loading

Table of Contents