Allen-Bradley AB QUALITY ControlLogix 1756 Series User Manual page 81

9-16
This message reads the value of the
seconds clock (S:23) in the PLC-5/40C
processor in the right chassis into data file
N7:0 of the PLC-5/40C processor in the left
chassis.
This is the node number of the DH+
channel on the local link (link 20).
This is the node number of the target
PLC-5/C processor.
Publication 1756-6.5.13 - September 1999
Load the example program:
a. Start another session of RSLogix5.
b. From the File menu, open the program "example." See page 4-2.
c. In the MSG instruction, double-click on Setup Screen.
d. Enter the following configuration.
This PLC-5:
Communication Command
Data Table Address
Size in Elements
Port Number
Target Device:
Data Table Address
Local DH+ Node
Local/Remote
Remote Link Type
Remote Station Address
Remote Bridge Link ID
e. Close the Setup Screen.
PLC-5 Typed Read
N7:0
1
1A
S:23
4
Remote
Data Highway
1
30