8-6
Initiate ControlNet to ControlNet Communication
Verify that the AB_KT-1
driver is selected.
Verify that the Reply Timeout is
set to a minimum of 10 seconds.
Publication 1756-6.5.13 - September 1999
Test the Application
To test the application, download the program to the PLC-5/40C processor
at ControlNet node 1 to send the message to the PLC-5/40C processor at
node 2.
Download the program to the PLC-5/40C processor at ControlNet
node 1:
a. From the Comms menu in RSLogix5 select System Comms.
The System Options window will appear with the System
Communications tab open.
b. Click on Who Active.