Routing Table Considerations; Edit The Message Instruction - Allen-Bradley AB QUALITY ControlLogix 1756 Series User Manual

c. If you do not see the correct display, check the faceplate indicators to
ensure the DHRIO and CNB modules are functioning properly. Verify
that the modules and cables are properly connected and that the switch
settings on the modules are correct. See chapter 2.
If you are still experiencing difficulty verify that the 1784-KTX
driver is configured properly. Make sure there is no conflict with
other hardware in your PC workstation.
Minimize RSLinx.

Routing Table Considerations

You do not need a routing table in this example because the 1756-DHRIO
module is not included in the path between the PLC-5/40C processors. For
further explanation about routing paths, see "Understanding How Routing
Tables Are Used" on page 1-3.

Edit the Message Instruction

Restore or start the RSLogix5 software:
a. From the Windows NT Start menu, select Programs.
b. Select Rockwell Software > RSLogix5 English
OR
Double-click on:
Load the example program:
a. From the File menu, open the program "example." See page 4-2.
b. In the MSG instruction, double-click on Setup Screen.
Initiate ControlNet to ControlNet Communication
Publication 1756-6.5.13 - September 1999
8-3