Configure The Routing Table In The 1756-Dhrio Module - Allen-Bradley AB QUALITY ControlLogix 1756 Series User Manual

Initiate DH+ to DH+ Communication Via a Single Gateway Module

Configure the Routing Table in the 1756-DHRIO Module

Start the configuration software:
a. From the Windows NT Start menu, select Programs.
b. Select ControlLogix Gateway > 1756gtwy.
Edit the routing table:
a. From the File menu in the configuration software, select Browse
Network. RSLinx starts.
b. Select the AB_KT_1 Data Highway Plus driver and double-click on the
1756-DHRIO module.
c. Select the Routing Table Configuration tab.
If you have previously configured any routing tables, click on Restore
Defaults to remove any previous configuration and restore the default
values.
Publication 1756-6.5.13 - September 1999
5-3