Set Up The Personal Computer; Install The 1784-Ktx Card; Install The Ethernet Card - Allen-Bradley AB QUALITY ControlLogix 1756 Series User Manual

2-2 Set Up the Hardware

Set Up the Personal Computer

SW3 SW4
CH2 CH1
CH1
3
4
5
7
9
10
11
(shown in IRQ5 position)
12
15
Publication 1756-6.5.13 - September 1999

Install the 1784-KTX Card

KTX Card
SW3 SW4
D 7
Channel 1 Address
shown in D700:
position

Install the Ethernet Card

Verify that your PC has an Ethernet card installed. If it does not, install any
commercial variety. Make sure the Ethernet card has a unique IP address to
prevent conflicts with other hardware. Verify also that you have assigned a
subnet address. Then connect the Ethernet card to a hub. See page 3-2 for
more details.
Set the interrupt jumpers on the communication
card (IRQ5 in this example).
Set the switches on the card.
(D700 in this example)
Remember to record the 1784-KTX address:
Channel 1 Address:_________________________
Insert the communication interface card into a
vacant 16-bit ISA or EISA expansion slot and
tighten the screw to secure the card.
For more information, see the KTX
Communication Interface Card User Manual,
publication number 1784-6.5.22.