Allen-Bradley AB QUALITY ControlLogix 1756 Series User Manual page 36

5-6 Initiate DH+ to DH+ Communication Via a Single Gateway Module
This is the node number of the
1756-DHRIO module on the local link.
This is the DH+ node number
of the target PLC-5/C processor
configured in chapter 2.
Publication 1756-6.5.13 - September 1999
c. Enter the following configuration.
This PLC-5:
Communication Command
Data Table Address
Size in Elements
Port Number
Target Devices:
Data Table Address
Local DH+ Node
Local / Remote
Remote Link Type
Remote Station Address
Remote Bridge Link ID
d. Close the Setup Screen.
Download the program to the PLC-5/40C processor at DH+ node 10:
a. From the Comms menu in RSLogix5 select System Comms
The System Options window will appear with the System
Communications tab open.
b. Select the AB_KT-1 Driver and click on Who Active.
PLC-5 Typed Write
S:23
1
1A
N7:0
3
Remote
Data Highway
1
This is the link ID that you
101
assigned in the
configuration software