Enter The Following Link Ids And Click On Ok; Channel A Link; Channel B Link; Select Add Module - Allen-Bradley AB QUALITY ControlLogix 1756 Series User Manual

You select this to include the
1756-ENET module in the left
chassis in the routing table.
This is the backplane of the left
chassis. Look for this just below
the new 1756-ENET entry (address
130.130.130.1).
You add this to include the
1756-DHRIO module in the left
chassis in the routing table.
k. Select Add Module.
l. Select 1756-ENET and click on OK. The Add Module pop-up window
will appear.
m. Enter the following configuration and click on OK:
IP Address 130.130.130.1
Link ID 0
n. Right click on the new Backplane [Link Undefined].
o. Select Add Module.
p. Select 1756-DHRIO and click on OK.
q. Enter the following link IDs and click on OK:
Slot Number
Channel A
Channel B
0
Link 10
Link 20
Publication 1756-6.5.13 - September 1999
9-11