Start Rslogix5 Software; Configure The Processor - Allen-Bradley AB QUALITY ControlLogix 1756 Series User Manual

Start RSLogix5 software

(page 4-1).

Configure the processor

(page 4-1).
Enter the ladder logic (page 4-2).
Save the program (page 4-2).
Start RSLogix5 Software
Configure the Processor
Enter the Basic Ladder Program
In this chapter, you enter a PLC-5 ladder program that sends the value of the
processor's internal seconds timer using a message instruction. You will use
this message instruction in the example applications to communicate
between processors. We will show you how to set up and modify the message
instruction for each application in the following chapters.
From the Start menu, select Programs.
Select Rockwell Software > RSLogix5 English.
Double click on:
When you start a new program in RSLogix5 software, you need to
configure the processor to specify processor type, communication settings,
etc. For information about how to do this, see Getting Results With
RSLogix5, publication number 9399-RL53GR.
OR
Publication 1756-6.5.13 - September 1999
4
Chapter