Allen-Bradley AB QUALITY ControlLogix 1756 Series User Manual page 43

6-4 Initiate DH+ to DH+ Communication Via Two Gateway Modules
Publication 1756-6.5.13 - September 1999
The following pop-up window will appear.
g. Select another 1756-DHRIO module and click on OK. The Add Module
pop-up window will appear.
h. Add the 1756-DHRIO module in slot 3 to the routing table by entering
the following information. Then click on OK:
Slot Number
Channel A
Channel B
i. The routing table configuration should now appear as shown below:
j. Click on Apply.
3
Link 102
Link 101