7-6
Initiate Ethernet to DH+ Communication
Publication 1756-6.5.13 - September 1999
Connect to the PLC-5/40C Processor
Connect to the PLC-5/40C processor at node 10 to upload or download
programs or to go on line with the processor.
Start the RSLogix5 software:
a. From the Windows NT Start menu, select Programs.
b. Select Rockwell Software > RSLogix5 English
OR
Double-click on:
c. From the Comms menu in RSLogix5, select System Comms.
The System Options window will appear with the System
Communications tab open.
d. Select TCP-1 as the Driver and click on Who Active.