4-2
Enter the Basic Ladder Program
Enter the Ladder Logic
Open a new program file.
Use the options on the user
toolbar to enter the example
program.
Save the Program
Publication 1756-6.5.13 - September 1999
Enter the following ladder logic.
With RXLogix5 software:
click here
to create a
new rung
The MSG configuration entered in the Setup Screen will vary depending
upon the application example.
Save the program as "example.rsp", then minimize the RSLogix5 software.
To save the program, you must enter a dummy configuration in the
Setup Screen so that RSLogix5 software can verify the project. See
page 5-6 for an example.
For more information about entering ladder logic, see the PLC-5
Programming Software Instruction Set Reference Manual, publication
number 1785-6.1 or Getting Results With RSLogix5, Rockwell
Software publication number 9399-RL53GR.
use these tabs to display
different categories of instructions