Configure The 1756-Enet Module In The Right Chassis - Allen-Bradley AB QUALITY ControlLogix 1756 Series User Manual

10-8 Initiate ControlNet to DH+ Communication With an Ethernet Backbone
You must make sure that each Ethernet
device has a unique IP address. For more
information, see page 7-3.
Make sure Bootp is disabled.
Publication 1756-6.5.13 - September 1999

Configure the 1756-ENET Module in the Right Chassis

Start the configuration software:
a. From the Windows NT Start menu, select Programs.
b. Select ControlLogix Gateway, select 1756gtwy.
Configure the IP address:
a. From the File menu in the configuration software, select Browse
Network.
RSLinx starts.
b. Select the AB_KT_1 Data Highway Plus driver and drill down the
backplane.
c. Double-click on the Ethernet module.
d. Select the Port Configuration tab.