Allen-Bradley AB QUALITY ControlLogix 1756 Series User Manual page 56

The RSWho window will appear.
e. Drill down through the TCP-1 Ethernet driver and double-click on the
PLC-5/40C processor.
f. When the System Communications tab reappears, click on the Online
button.
g. If no program is loaded in the PLC-5/40C processor, a pop-up window
will appear with the message "You cannot go Online to DEFAULT
program." Enter a new processor name of your choice (e.g., "Example")
and click on OK.
• Disregard any warnings about Control Net devices.
• It is not necessary to save the program.
You are now online and can program or run the PLC-5/40C processor via
the remote Ethernet link.
Initiate Ethernet to DH+ Communication
Publication 1756-6.5.13 - September 1999
7-7