Using Dual Monitor Emulation - Polycom HDX 4000 Series Administrator's Manual

Administrator's Guide for Polycom HDX Systems

Using Dual Monitor Emulation

3–10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Setting Description
Screen Saver Wait Specifies how long the system remains awake during
Time periods of inactivity. The default is 3 minutes. If the
system requires users to log in, the screen saver timeout
also logs out the current user.
Setting this option to Off prevents the system from going
to sleep. To prevent image burn-in, specify 3 minutes or
less.
Note: The screen saver feature is disabled during the
setup wizard. To prevent image burn-in, complete the
setup wizard promptly.
Dual Monitor Emulation is available on Polycom HDX 9000 series, Polycom
HDX 8000 series, Polycom HDX 7000 series, Polycom HDX 6000 series,
Polycom HDX 4500, and Polycom HDX 4000 HD with Hardware Version C
systems.
For the Polycom HDX 4500 system, Dual Monitor Emulation is an internal feature.
The feature does not appear with the Monitor settings and it has no settings you
can change.
Dual Monitor Emulation is designed for rooms or offices with one monitor
only. Users see both near and far sites on one monitor in two different
windows. During presentations, users see content and the near and far sites.
What you see during a call can depend on factors such as the Polycom HDX
system monitor configuration, the number of sites in the call, and whether
content is being shared.
The following systems show only two windows in Dual Monitor Emulation: Polycom
HDX 9006, Polycom HDX 8000 HD with Hardware Version B, Polycom HDX 7000
series with Hardware Version C or D, Polycom HDX 6000 series, Polycom
HDX 4500, and Polycom HDX 4000 HD with Hardware Version C.
Polycom, Inc.